黑龙江11选5

Conventional Lathe

Heavy Duty
TK1800N / 2000N / 2500N
Conventional Lathe-TK1800N / 2000N / 2500N
  • Specification
  • Standard Accessories
  • Options
Model TK 1800N TK 2000N TK 2500N
Capacity Swing over bed 1800 mm (70.86") 2000 mm (78.74") 2500 mm (98.42")
Swing over cross slide
(Full length)
1350 mm (53.14") 1550 mm (61.02") 2050 mm (80.7")
Swing over cross slide
(Half length)
1530 mm (60.23") 1720 mm (67.71") 2200 mm (86.61")
Center height 900 mm (35.43") 1000 mm (39.37") 1250 mm (49.21")
Between centers 3000-12000 mm (120"-480")
Bed width / Auxiliary guide 1345 mm (52.95") / 1550 mm (61.02")
Headstock Spindle bore, Dia. Ø 230 mm (9")
Spindle nose (Camlock) A2-15
Spindle speed (rpm), steps 6-400 rpm
Spindle motor 75 HP
Feed & Threads Cross feed 0.056-0.96 mm / rev(48 kinds)
Cross slide travel 1250 mm (Full length) / 510mm (Half length)
Compound rest travel X1: 250mm manual feeding / Z1: 400mm auto feeding
Tool size 50 X 50 mm (2 x 2")
Longitudinal feeds 0.13 - 1.92 mm / rev (48 kinds)
Lead screw Ø 60 mm x 2 TPI (Inch) or Ø 60 mm x 12 mm (Metric)
Threading range, Metric 2-30 mm / pitch (48 kinds)
Threading range, Inch 1 -15 TPI (48 kinds)
Module pitch threads 1-15 M (32 kinds)
DP. Pitch threads 2-30 P (48 kinds)
Tailstock Quill Diameter Ø 290 mm (11.4") heavy duty rotating quill
Center taper MT-7
Quill travel 300 mm (11.81")
Miscellaneous Rapid motor 2HP
Coolant pump 1HP
Lubrication pump 12W
Machine weight
(3 meter B. C.)
28000 kgs 29000 kgs 30500 kgs
Each extra 1000mm weight 4500 kgs

*The Specifications are subject to change without prior notice。

  • Inch/metric dual gear box
  • 4-way toolpost with T slot
  • Work light
  • Coolant system
  • Thread chasing dial
  • 6-way rapid travel
  • Main motor with inverter
  • Hydraulic spindle disk brake 
  • Magnetic brake for main spindle
  • Auto lubrication system
  • Electric motor for tailstock body movement
  • Tailstock rotating quill
  • Sleeve & centers
  • Tool box with tools
  • Manual
  • Leveling bolts & pads
  • Upgrade spindle bore
  • Upgrade spindle motor
  • Chuck or Face plate
  • Adaptor for rear chuck
  • Front chuck protection cover
  • Rear chuck protection cover
  • Boring bar tool holder (Full length cross slide only) 
  • Steady rest
  • Follow rest
  • Rear tool post
  • Taper attachment (±10 degree, stroke 500mm)
  • Movable rear splash guard
  • Digital read out
  • Heavy duty roller support bracket
  • CE mark
辽宁快乐12开奖结果 山东11选5开奖 快乐时时彩 福建快3开奖 浙江快乐12开奖 江苏快3官网 河北11选5开奖 浙江体彩6+1开奖 北京两步彩 上海天天彩选4玩法